200Hz-15kHz
Terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters. 1.4 m cable. Includes accessory kit. See AT898.
Designed to be worn as a lavalier or hidden in clothing, Audio-Technica’s discreet-design cardioid AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive appearance for use in houses of worship, broadcast studios, theaters, etc. Its switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power.
Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
Accessories available separately
3.0 m cable permanently attached to mic, TA3F connector at power module
RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Also available as:
AT898c – less power module; 1.4 m cable, unterminated
AT898cL4 – less power module; 1.4 m cable terminated with Lemo connector for Sennheiser SK wireless systems
AT898cT4 – less power module; 1.4 m cable terminated with TA4F connector for Shure wireless systems
AT898cT5 – less power module; 1.4 m cable terminated with TA5F connector for ATW-U101 body-pack wireless system
AT898cW – less power module; 1.4 m cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 200-15,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
IMPEDANCE Phantom: 200 ohms Battery: 250 ohms
MAXIMUM INPUT SOUND LEVEL Phantom: 131 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) Phantom: 100 dB, 1 kHz at Max SPL Battery: 84 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 63 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
BATTERY TYPE 1.5V AA/UM3
BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical (alkaline)
SWITCH Flat, roll-off (recessed)
WEIGHT (MICROPHONE) 0.9 g
WEIGHT (POWER MODULE) 102 g
DIMENSIONS (MICROPHONE) 0.91" (23.0 mm) long, 0.21" (5.3 mm) diameter
DIMENSIONS (POWER MODULE) 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
ACCESSORIES FURNISHED AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens; battery; protective carrying case
Designed to be worn as a lavalier or hidden in clothing, Audio-Technica’s discreet-design cardioid AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive appearance for use in houses of worship, broadcast studios, theaters, etc. Its switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power.
Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
Accessories available separately
3.0 m cable permanently attached to mic, TA3F connector at power module
RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Also available as:
AT898c – less power module; 1.4 m cable, unterminated
AT898cL4 – less power module; 1.4 m cable terminated with Lemo connector for Sennheiser SK wireless systems
AT898cT4 – less power module; 1.4 m cable terminated with TA4F connector for Shure wireless systems
AT898cT5 – less power module; 1.4 m cable terminated with TA5F connector for ATW-U101 body-pack wireless system
AT898cW – less power module; 1.4 m cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 200-15,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
IMPEDANCE Phantom: 200 ohms Battery: 250 ohms
MAXIMUM INPUT SOUND LEVEL Phantom: 131 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) Phantom: 100 dB, 1 kHz at Max SPL Battery: 84 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 63 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
BATTERY TYPE 1.5V AA/UM3
BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical (alkaline)
SWITCH Flat, roll-off (recessed)
WEIGHT (MICROPHONE) 0.9 g
WEIGHT (POWER MODULE) 102 g
DIMENSIONS (MICROPHONE) 0.91" (23.0 mm) long, 0.21" (5.3 mm) diameter
DIMENSIONS (POWER MODULE) 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
ACCESSORIES FURNISHED AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens; battery; protective carrying case
AT898CW Mini Lavaliere Mic Condenser Cardioid
- Product Code:AT898CW
- U.O.M: ea
- Available: 1
-
$238.25 GST Excl.$273.99 GST Inc.$256.52 GST Excl.$295.00 GST Inc.