The ATND1061 Beamforming Ceiling Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state of the art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061 is easy to install, set up, and operate.

The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small

Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4 band EQ

User friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings

Six individual output channels with up to 32 user defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types

Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants

Output Channels 2–6 can be configured with up to 16 user defined Priority Zones to ensure priority pickup of participants in known locations

Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling

Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air handling systems)

Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)

Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount

UL 2043 compliant for installation in plenum spaces

Includes tile bridge, safety wiring, and mounting hardware and accessories

Low reflective white finish matches ceiling tiles in most environments

Powered by network PoE

Specifications;

Beam Width 90-degrees
Polar Pattern Beam pattern
Frequency Response 60 Hz to 18,000 Hz
Maximum Input Sound Level 102 dBSPL
Sensitivity -8 dBFS (1 kHz, 94 dBSPL)
Dynamic Range 89 dB (A-weighted)
Signal-to-Noise Ratio 61.5 dB (A-weighted)
Self-Noise 25 dBSPL (A-weighted)
Analog Audio
Frequency Response 20 Hz to 20 kHz (+1.0/-2.0 dB)
Dynamic Range 100 dB (A-weighted)
Signal to Noise Ratio 80 dB (A-weighted)
Headroom 20 dB
Residual Noise -75.8 dBu (A-weighted)
T.H.D <0.1% (1 kHz, unity)
Analog Input MIC Maximum: -30 dBu
MIC Unity: -50 dBu
LINE Maximum: +12.2 dBu
LINE Unity: -10 dBV, Switchable
Analog Output OUTPUT Maximum: +19.2 dBu
OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable
General Specifications - Beamforming Array
Power Requirement PoE (IEEE 802.3af Class 0)
Power Consumption Max. 7 W
Operation Temperature Range 0°C to 40°C (32°F to 104°F)
Operation Humidity Range 25% to 85% (Non condensing)
Dimensions 227.5 mm × 227.5 mm × 30 mm (W × D×H)
Weight 1250 g
Network Dante: 1 Gbps
IP control: 100 Mbps
Digital Audio Sampling rate: 48 kHz
Bit depth: 24 bit
Latency Microphone (CH1 to CH6): 47 msec
Microphone (Auto Mix CH): 79 msec
Dante: Min. 250 usec, Max. 5 msec
I/O Connector Network/Dante: RJ-45
Analog input: Euroblock 3 pin
Analog output: Euroblock 3 pin
GPI: Euroblock 3 pin
Phantom Power Analog input: 12 V
Included Accessories ·IR remote controller
·Surface mount adapter
·Screw (M4 × 50 mm) × 4
·Flush mount adapter
·Flush mount cover
·Screw (M4 × 10 mm) × 12
·Hole cover
·Nut × 4
·Snap bushing × 2
·Tile bridge A × 2
·Tile bridge B × 2
·Tile bridge C × 4
·Seismic cable
·Zip tie
·Safety belt
·Euroblock connector × 3
·Installation template