The SX118 is a compact, high performance subwoofer that extends the low frequency operating range of the system to 47Hz and provides exceptional low frequency output for such a compact enclosure.
Features
Compact, direct radiating subwoofer
18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
High output capability
Tour grade plywood enclosure with flying inserts
Compact, direct radiating subwoofer
FREQUENCY RESPONSE 47Hz – 150Hz ±3dB,-10dB @ 41Hz
DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
RATED POWER 1000W AES, 4000W peak
SENSITIVITY 102dB
MAXIMUM SPL 138dB peak
NOMINAL IMPEDANCE 8Ohm
DISPERSION (-6dB) Omnidirectional/or Cardioid (paired)
ENCLOSURE Multi-laminate birch/poplar ply
FINISH Black textured paint
GRILLE Black perforated steel
CONNECTORS 2 x NL4 type
PIN CONNECTIONS (INPUT) LF: +1, -1 Link through: +2, -2
PINS CONNECTIONS (LINK) LF: +1, -1 Link through: +2, -2
FITTINGS
Two skids on base, with mating channels on top
Four rear-mounted 100mm (4in) castors
M20 top mounted thread plate for pole mounting
16 x M10 mounting points
2 x bar handles, 1 on each side
4 x fittings for optional transit cover
DIMENSIONS (INCL SKIDS)
(W) 600mm x (H) 509mm x (D) 632mm
(760mm including castors)
WEIGHT 47kg
SX118 features a long excursion 18” (460mm)/4” (100 mm) voice coil driver with a water resistant cone and triple roll surround in a compact reflex enclosure
The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from multi laminate birch ply, finished with a durable polyurea coating and equipped with a Zintec grille, twin grab handles, skids, flying inserts for installation and a threaded pole socket for pole mounting point source loudspeakers or up to 4 WPM enclosures as a simple plug and play system
The product is supplied as standard without cabinet wheels, but they are available as an accessory
By adding the input board cover accessory, SX118 is fully weather resistant and suitable for permanent outdoor usage
Features
Compact, direct radiating subwoofer
18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
High output capability
Tour grade plywood enclosure with flying inserts
Compact, direct radiating subwoofer
FREQUENCY RESPONSE 47Hz – 150Hz ±3dB,-10dB @ 41Hz
DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
RATED POWER 1000W AES, 4000W peak
SENSITIVITY 102dB
MAXIMUM SPL 138dB peak
NOMINAL IMPEDANCE 8Ohm
DISPERSION (-6dB) Omnidirectional/or Cardioid (paired)
ENCLOSURE Multi-laminate birch/poplar ply
FINISH Black textured paint
GRILLE Black perforated steel
CONNECTORS 2 x NL4 type
PIN CONNECTIONS (INPUT) LF: +1, -1 Link through: +2, -2
PINS CONNECTIONS (LINK) LF: +1, -1 Link through: +2, -2
FITTINGS
Two skids on base, with mating channels on top
Four rear-mounted 100mm (4in) castors
M20 top mounted thread plate for pole mounting
16 x M10 mounting points
2 x bar handles, 1 on each side
4 x fittings for optional transit cover
DIMENSIONS (INCL SKIDS)
(W) 600mm x (H) 509mm x (D) 632mm
(760mm including castors)
WEIGHT 47kg
SX118 features a long excursion 18” (460mm)/4” (100 mm) voice coil driver with a water resistant cone and triple roll surround in a compact reflex enclosure
The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from multi laminate birch ply, finished with a durable polyurea coating and equipped with a Zintec grille, twin grab handles, skids, flying inserts for installation and a threaded pole socket for pole mounting point source loudspeakers or up to 4 WPM enclosures as a simple plug and play system
The product is supplied as standard without cabinet wheels, but they are available as an accessory
By adding the input board cover accessory, SX118 is fully weather resistant and suitable for permanent outdoor usage
Martin 1 x 18" Compact Direct Radiating Subwoofer
- Product Code:SX118
- U.O.M: ea
- Available: 4
-
$2,482.72 GST Excl.$2,855.13 GST Inc.$2,600.00 GST Excl.$2,990.00 GST Inc.