MARINE grade
CDD Marine Information
CDD-MAR has been engineered for marine environments such as cruise ships and saltwater locations and meets the requirements of IEC 529 to an IP54 level. UV tested to BS EN ISO 4892 – 2: 2013 method A – cycle B, accelerated 1600-hour UV test.
Cabinets
• Cabinet construction consists of an injection moulded back shell, which is fabricated from a durable polypropylene cellulose reinforced composite material. Then finished with a UV stabilised Plastilack paint.
• Front baffle and cabinet bracing and are fabricated from birch plywood and finished with a tough Polyurethane paint with UV resistant topcoat.
• Baffles are fixed to the cabinet with a 2-part 3M adhesive and A4 stainless screws.
• Internal cabinet braces are fixed using 2-part 3M adhesive.
Fixings
• External fixings are A4 marine grade stainless steel.
• Internal brackets are 316L stainless steel with A4 stainless steel captive nuts.
Grille
• The grille assembly is a UV resistant, 1.5mm 316L stainless steel sheet, backed with fine polyester cloth and finished with a nylon reinforced polyester powder coat. A layer of Declon, and a secondary (316L stainless) grille with a hydrophobic Saati mesh.
Speaker Components
• Loudspeaker cone surfaces are coated with a water proofing treatment.
Speaker Cabling
• A captive 3m, 4 core 2.5mm speaker cable sealed with a cable gland and fitted to a 316L stainless plate on the rear of the cabinet.
The SX218 achieves the ultimate in subwoofer performance for the most demanding applications delivering very high output levels and superb transient performance with minimal distortion it is the perfect partner to WPC, with one subwoofer to every 2 top boxes required.
Features
Dual driver, direct radiating subwoofer
2 x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
Very high output capability
Tour grade plywood enclosure with flying inserts
Applications
Live sound reinforcement
Theatre sound
Corporate AV events
Dual driver, direct radiating subwoofer
FREQUENCY RESPONSE 35Hz – 150Hz ±3dB,-10dB @ 30Hz
DRIVER 2 x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
RATED POWER 2000W AES, 8000W peak
SENSITIVITY 105dB
MAXIMUM SPL 144dB
NOMINAL IMPEDANCE 2 x 8Ohm
DISPERSION (-6dB) Omnidirectional/or Cardioid (paired)
ENCLOSURE Multi-laminate birch/poplar ply
FINISH Black textured paint
GRILLE Black perforated steel
CONNECTORS 2 x NL4 type
PIN CONNECTIONS (INPUT) LF1: 1+, 1- LF2: 2+, 2-
PINS CONNECTIONS (LINK) LF1: 1+, 1- LF2: 2+, 2-
FITTINGS
Two skids on base, with mating channels on top
Four rear mounted 100mm (4in) castors
24 x M10 mounting points
4 x bar handles, 2 on each side
4 x fittings for optional transit cover
DIMENSIONS (INCL SKIDS)
(W) 1085mm x (H) 537mm x (D) 792mm
(920mm including castors)
WEIGHT 102kg
CDD-MAR has been engineered for marine environments such as cruise ships and saltwater locations and meets the requirements of IEC 529 to an IP54 level. UV tested to BS EN ISO 4892 – 2: 2013 method A – cycle B, accelerated 1600-hour UV test.
Cabinets
• Cabinet construction consists of an injection moulded back shell, which is fabricated from a durable polypropylene cellulose reinforced composite material. Then finished with a UV stabilised Plastilack paint.
• Front baffle and cabinet bracing and are fabricated from birch plywood and finished with a tough Polyurethane paint with UV resistant topcoat.
• Baffles are fixed to the cabinet with a 2-part 3M adhesive and A4 stainless screws.
• Internal cabinet braces are fixed using 2-part 3M adhesive.
Fixings
• External fixings are A4 marine grade stainless steel.
• Internal brackets are 316L stainless steel with A4 stainless steel captive nuts.
Grille
• The grille assembly is a UV resistant, 1.5mm 316L stainless steel sheet, backed with fine polyester cloth and finished with a nylon reinforced polyester powder coat. A layer of Declon, and a secondary (316L stainless) grille with a hydrophobic Saati mesh.
Speaker Components
• Loudspeaker cone surfaces are coated with a water proofing treatment.
Speaker Cabling
• A captive 3m, 4 core 2.5mm speaker cable sealed with a cable gland and fitted to a 316L stainless plate on the rear of the cabinet.
The SX218 achieves the ultimate in subwoofer performance for the most demanding applications delivering very high output levels and superb transient performance with minimal distortion it is the perfect partner to WPC, with one subwoofer to every 2 top boxes required.
Features
Dual driver, direct radiating subwoofer
2 x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
Very high output capability
Tour grade plywood enclosure with flying inserts
Applications
Live sound reinforcement
Theatre sound
Corporate AV events
Dual driver, direct radiating subwoofer
FREQUENCY RESPONSE 35Hz – 150Hz ±3dB,-10dB @ 30Hz
DRIVER 2 x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
RATED POWER 2000W AES, 8000W peak
SENSITIVITY 105dB
MAXIMUM SPL 144dB
NOMINAL IMPEDANCE 2 x 8Ohm
DISPERSION (-6dB) Omnidirectional/or Cardioid (paired)
ENCLOSURE Multi-laminate birch/poplar ply
FINISH Black textured paint
GRILLE Black perforated steel
CONNECTORS 2 x NL4 type
PIN CONNECTIONS (INPUT) LF1: 1+, 1- LF2: 2+, 2-
PINS CONNECTIONS (LINK) LF1: 1+, 1- LF2: 2+, 2-
FITTINGS
Two skids on base, with mating channels on top
Four rear mounted 100mm (4in) castors
24 x M10 mounting points
4 x bar handles, 2 on each side
4 x fittings for optional transit cover
DIMENSIONS (INCL SKIDS)
(W) 1085mm x (H) 537mm x (D) 792mm
(920mm including castors)
WEIGHT 102kg
Martin 2 x 18" Dual Driver Direct Radiating Subwoofer WHITE
- Product Code:SX218W-MAR
- U.O.M: ea
- Available: 0 (On backorder)
-
$10,117.32 GST Excl.$11,634.92 GST Inc.$11,295.65 GST Excl.$12,990.00 GST Inc.