The THH system is a trapezoidal three way bi amp Hybrid® fully horn loaded type, horizontally formatted and consisting of one 15” (380mm) /4” (100mm) voice coil horn and reflex loaded low frequency transducer, one 10” (250mm) /2.5” (63.5mm) voice coil horn loaded mid frequency transducer with a “phase ball” loading device and one 1” (25mm) exit HF compression driver mounted on a constant directivity horn. The enclosure is a multi laminate birch ply construction with threaded inserts to implify mounting and fitted with 4 pocket handles and 4” (100mm) castors for easy deployment. The loudspeaker is operated with a separate electronic controller or amplifier providing a 200Hz crossover between low and mid/high frequency sections. The mid and high frequency sections are integrated by an internal 2kHz passive crossover network. Performance of the loudspeaker system with its electronic controller or amplifier meets or exceeds the following criteria: Frequency response measured 1 metre on axis - 50Hz-18kHz ±3dB. High frequency dispersion at -6dB points - 70°H x 40°V. Power handling - 750W AES, 3000W peak LF, 300W AES, 1200W peak MF + HF. Rated impedance - 8 ohms LF, 8 ohms MF + HF. Maximum SPL calculated at 1 metre on axis - 133dB continuous, 139dB peak. Dimensions (W) 1067mm x (H) 558mm x (D) 780mm (42ins x 22ins x 30.7ins). Weight 77.5kg (170.5lbs)

TYPE Three way bi amp trapezoid Hybrid® fully horn loaded
FREQUENCY RESPONSE (5) 50Hz-18kHz ± 3dB
DRIVER
15” (380mm)/4” (100mm) coil bass driver
10” (250mm)/2.5” (63.5mm) coil mid driver
1” (25mm) exit HF compression driver
RATED POWER (2)
LF: 750W AES, 3000W peak
MF + HF: 300W AES, 1200W peak
SENSITIVITY (8) LF: 104dB, MF + HF: 104dB
MAXIMUM SPL (9) 133dB continuous, 139dB peak
NOMINAL IMPEDANCE LF: 8O, MF + HF: 8O
DISPERSION (-6DB) 70° horizontal, 40° vertical
CROSSOVER 200Hz active, 2kHz passive
ENCLOSURE 250 litre, multi-laminate birch ply
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL4
PIN CONNECTIONS LF+,- : 1+,1-
(MF + HF) +,- : 2+,2-
FITTINGS 12 x M10 inserts
4 x 4” (100mm) castors
4 x pocket handles
DIMENSIONS
(W) 1067mm x (H) 558mm x (D) 780mm (908mm)
(W) 42ins x (H) 22ins x (D) 30.7ins (35.7ins)
WEIGHT 77.5kg (170.5lbs)

Success: Review submitted sucessfully, Your review will appear as soon as we have taken a look over it.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating     Bad           Good

Submit Review