70Hz-14kHz 48V Integral PSU Miniature
The PRO 42’s low profile design assures inconspicuous appearance for surface mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide range condenser element and low mass diaphragm for superior performance, the microphone is equipped with self contained electronics, eliminating the need for external power modules
Very low profile design for minimum visibility
Wide range condenser element with low mass diaphragm for superior performance
Uniform polar pattern for maximum rejection of unwanted sounds
Rugged design and construction
7.6 m cable permanently attached between microphone and XLRM-type connector
ELEMENT Fixed charge back plate, permanently polarized condenser
POLAR PATTERN Half cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 70-14,000 Hz
OPEN CIRCUIT SENSITIVITY -38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 105 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical
WEIGHT 35 g
DIMENSIONS 36.6 mm maximum width, 54.3 mm maximum length, 15.5 mm height
OUTPUT CONNECTOR 3-pin XLRM-type on cable
CABLE 7.6 m long, permanently attached
Very low profile design for minimum visibility
Wide range condenser element with low mass diaphragm for superior performance
Uniform polar pattern for maximum rejection of unwanted sounds
Rugged design and construction
7.6 m cable permanently attached between microphone and XLRM-type connector
ELEMENT Fixed charge back plate, permanently polarized condenser
POLAR PATTERN Half cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 70-14,000 Hz
OPEN CIRCUIT SENSITIVITY -38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 105 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical
WEIGHT 35 g
DIMENSIONS 36.6 mm maximum width, 54.3 mm maximum length, 15.5 mm height
OUTPUT CONNECTOR 3-pin XLRM-type on cable
CABLE 7.6 m long, permanently attached
PRO42 Surface Boundary Mic Condenser Cardioid
- Product Code:PRO42
- U.O.M: ea
- Available: 7
-
$130.41 GST Excl.$149.97 GST Inc.$146.96 GST Excl.$169.00 GST Inc.